If you have a fireplace, it may actually be costing you energy dollars. Some fireplace designs produce convection currents when you start a crackling fire. These currents can draw the warm air up and out of your home.
Heat Seasonal Performance Factor measures the effectiveness of your HVAC systems heat pump. It represents the total heat output of the heat pump during the heating season. Higher numbers mean more efficient systems.
Direct Digital Controlling (DDC) is used to control HVAC devices such as valves, via microprocessors, using software to perform the control logic. Through computer programming, it enables a variety of energy saving, environmentally friendly uses.
By installing an HVAC heating and cooling system in your house, you may be eligible for tax credits. Depending on the age of your equipment and the proper paperwork in order, you can get as much as a $1,500 credit.
A noisy air conditioner is actually a sign that there may be an issue. You may in fact have an undersized duct system, or there might be a problem that’s developed with the system’s inner coil.
Air handling units are used in commercial central HVAC systems to move and condition air, which is then supplied to the conditioned spaces. This component will typically include a fan, heating and cooling coils, and outdoor and inlet dampers.
Did you know that natural gas is considered to be one of the world’s safest sources of energy? In addition, natural gas is consistent, reliable, and can yield long-term savings on your energy bills.
Did you know that having us perform regular service on your HVAC system can keep it in proper working order longer? Even when there’s a problem with your unit, we may be able to catch it before it stops working.
A heat pump is effective and green heating method which runs on electricity and integrates well with air conditioning systems. Unfortunately, it's not effective below certain temperatures, which is why many commercial systems integrate gas systems for when temperatures get too low.
Did you know that the components of HVAC systems were invented during the Industrial Revolution? HVAC system design requires knowledge in equipment technology as well as mechanical engineering. These were both fields that led the way in the Industrial Revolution.
Most new furnaces are expected to last between 10 and 15 years. However, with proper maintenance and annual servicing, you can help ensure that your furnace reaches 15 years or even longer.
One of the major expenses for a business is in heating and cooling, partially because of the size of commercial buildings. That's where an installation of a high efficiency HVAC can make a big difference. Correctly installed, these could cut your energy bills in half.
Trickle vents have a positive effect on indoor environment. They help to avoid problems associated with poor ventilation in naturally ventilated spaces such as open doors or windows. They also reduce the risk of condensation, minimize energy consumption, and improve comfort in your office or building through draft avoidance.
Are you concerned that installing the same type of HVAC equipment in your office building will result in the same issues you had with the last? We’re always happy to help you design an HVAC system that truly meets your needs.
With the help of Willis Carrier and other prominent mechanical engineers of the turn of the century, air conditioning became practical for commercial applications. If you were a trader at the New York Stock Exchange, work became easier in 1902, when the first central cooling and heating system was installed.
A properly maintained HVAC system can last from 10 to 15 years. This assumes that the system is properly installed and maintained. Each system should be checked twice a year to perform at optimum levels.
If you have an older HVAC system, you may want to explore replacing the equipment. Since building codes can change over time, the system you have may not still meet current requirements.
If you purchased your HVAC system before 2010, you may want to consider replacing the unit before 2020. Before 2010 most HVAC systems used the refrigerant Freon. However, Freon is dangerous to the environment and will not be available after 2020.
Did you know that letting the ductwork in your home get dirty can make your HVAC system run less efficiently and circulate dust and dirt? Ask an HVAC professional about air duct cleaning and the many benefits it offers.
Natural gas refining techniques improved greatly in the 1800s, and by the late-1800s, manufacturers in the US started selling gas-powered appliances. They started with a gas stove in 1880, but quickly started selling gas-powered tank water heaters in 1883.
If your company uses sensitive electronic equipment at your location, climate control is a serious issue. Heat can irreparably damage the components, causing data to be lost and valuable time wasted. An efficient climate-control system will protect your investment.
You can landscape around the outdoor components of your HVAC system, but be careful with your plantings. Leave enough room for air to properly circulate, as well as keeping the unit accessible for maintenance and repair.
An automated energy management system is the most effective method for keeping heating and air-conditioning costs under control in your building. It adjusts building temperatures according to use and occupancy, and identifies peak and off hour energy consumption.
In a commercial HVAC system, air flowing through a duct system will encounter friction losses through contact with the duct walls and when passing through devices such as dampers, diffusers, filters, and coils. This is why the fan is necessary, to provide the energy input required to overcome friction losses and circulate air through the system.